|
Professional Grading eXperts
|
 PGX
Speed
Accuracy
Consistency
PGX Homepage >> Services >> PGX Holder
|
|||||||||||||||
|
The PGX Holder  PGX blog 
|
How to remove your comic from a PGX Holder
1. Open up side edge of outer older.
2. Take a flat edge screwdriver and insert about 1/4", slide screwdriver to corner post.
3. Twist screwdriver to break open corner post. Repeat on second corner.
4. Carefully slide inner holder out. * We suggest either a cutting board with an arm or a razor
* Always take caution when cutting book out of holder to avoid damaging the book
* When using a cutter be sure you are standing up and are applying moderate pressure across the book's surface to prevent the cutter possibly pulling the book further towards the cutting arm than desired
 Back to top  Back to top
6. (Optional) Cut a triangle out of the inner holder from top edge of book down side edge to help with easing the book out of the holder
7. Carefully lift back each side of the holder, get ahold of the book, and slowly pull from holder |
The PGX Gallery
Full Slab Scans! Examples from 2.0-10.0!  Detective Comics #419 PGX Signature Edition Near Mint - (9.2) DC Comics, 1971 |
||||||||||||||
