How to remove your comic from a PGX holder
February 2nd, 2006 | 
Author: Daniel
Author: Daniel
| Step 1: | Open outer edge |
| Step 2: | Access corner posts |
| Step 3: | Open corner posts |
| Step 4: | Remove inner holder |
| Step 5: | Remove label from inner holder |
| Step 6: | Remove inner holder corners |
| Step 7: | Remove book from inner holder |
1. Open up side edge of outer older.
Back to top
2. Take a flat edge screwdriver and insert about 1/4″, slide screwdriver to corner post.
Back to top
3. Twist screwdriver to break open corner post. Repeat on second corner.
Back to top
4. Carefully slide inner holder out.
Back to top
* We suggest either a cutting board with an arm or a razor
* Always take caution when cutting book out of holder to avoid damaging the book
* When using a cutter be sure you are standing up and are applying moderate pressure across the book’s surface to prevent the cutter possibly pulling the book further towards the cutting arm than desired
6. (Optional) Cut a triangle out of the inner holder from top edge of book down side edge to help with easing the book out of the holder
Back to top
7. Carefully lift back each side of the holder, get ahold of the book, and slowly pull from holder
Back to top
Although removing a book from the PGX holder is simple, always take caution when cutting book out of holder to avoid damaging the book!
Back to top
How do we stack up against the competition?
Helpful tips for picking the best comics to grade!
Loading ...